Fluke DSX 8000

The DSX Cable Analyzer Series copper test solution enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A, 8 or Class FA and I/II. Certifying a cable is one part of a process that starts with system design and ends with system acceptance. The faster that process goes, the more profitable you’ll be. Unfortunately, there are a lot of things that slow the process down – setting up the tester incorrectly, testing to the wrong limits, waiting for skilled technicians to analyze and troubleshoot failures, misinterpretation of results, and producing test reports that customers cannot understand.

Product Specs

• Autotest Time – DSX-8000: Full 2-way Autotest of Cat 5e or 6/Class D or E: 7 seconds Full 2-way Autotest of Cat 6A/Class EA: 8 seconds Full 2-way Autotest of Cat 8: 16 seconds
• Support test parameters – Wire Map, Length, Propagation Delay, Delay Skew, DC Loop Resistance, Pair-to-Pair Resistance Unbalance, Pair Resistance Unbalance, Insertion Loss (Attenuation), Return Loss (RL), Common Mode Return loss (CMRL), Near End Crosstalk (NEXT), Far End Crosstalk (FEXT), Attenuation-to-crosstalk Ratio (ACR-N), ACR-F (ELFEXT), Power Sum ACR-F (ELFEXT), Power SumNEXT, Power Sum ACR-N, Power Sum Alien NEXT (PS ANEXT), Power Sum Alien Attenuation NEXT Ratio Far End (PS AACR-F),
  Common Mode to Differential Mode NEXT (CDNEXT),Transverse Conversion Loss (TCL), Equal Level Transverse Conversion
  Transfer Loss (ELTCTL)
• Input protection – Protected against continuous telco voltages and 100 mA over-current. Occasional ISDN over-voltages will not cause damage
• Display – 5.7 in LCD display with a projected capacitance touchscreen
• Case – High impact plastic with show absorbing overmold
• Dimensions – Main Versiv unit with DSX module and battery installed: 2.625 in x 5.25 in x 11.0 in (6.67 cm x 13.33 cm x 27.94 cm)
• Weight – Main Versiv unit with DSX module and battery installed: 3 lbs, 5oz (1.28 kg)
• Main unit and remote – Lithium ion battery pack, 7.2 V
• Typical battery life – 8 hours
• Charge time* – Tester off: 4 hours to charge from 10 % capacity to 90 % capacity
• Languages supported – English, French, German, Italian, Japanese, Portuguese, Spanish, Chinese, Korean, Russian, Trad Chinese, Czech, Polish, Swedish, Hungarian
• Calibration – Service center calibration period is 1 year
• Integrated Wi-Fi – Meets IEEE 802.11 a/b/g/n; dual band (2.4 GHz and 5 GHz)

Please note:

This product cannot be used for Patch Cord Certification for Cat 5e, Cat6 or Cat 6A MPTL Testing. “ Not Supplied With DSX-PCxxS Adapters”