• Next Day Delivery
  • Price Match
  • Unlimited Support

CMR Controls CAL95 Micro Manometer Calibrator

Product Code: CALO61
£90.00 Per week
CMR Controls CAL95 Micro Manometer Calibrator
Call us on 01928 589600
Request a quote

CMR Controls CAL95 Micro Manometer Calibrator

Product Code: CALO61
£90.00 Per week

CMR Controls CAL95 Micro Manometer Calibrator Description

The CMR Controls CAL95 Micro Manometer Calibrator is designed to calibrate pressure or velocity transmitters. The unit is ideal for situations where accuracy and a fast response is necessary, such as differential pressure measurement, as well as long-term monitoring. It is also ideal for commissioning work due to its compact yet powerful design. This pneumatic calibrator is available for rent from as little as £90 per week.

Features and Benefits

  • Extremely low pressure sensitivity
  • Built-in rotary hand pump
  • LCD Display 3 1/2 and 4 1/2 digit
  • Purge valves on + and – port
  • Fine zero adjustment
  • Auto switch off if there is no change in pressure

Product Specs

  • Measurement Range: +/- 199.9 Pa and +/- 1999.9 Pa
  • Optional Range: Special units can be manufactured by CMR on request
  • Overload Capacity: Ranges +/- 199.9 up to max 3000Pa. Ranges from +/- 1999.9 Pa 5 times of range
  • Media: Non-corrosive gases such as Air,N2,O2,CO2,N2 O, inert gases
  • Diaphragm Unit: Bronze Beryllium Copper suitable for high concentration of Formaldehyde
  • AC Power Supplies: Mains power supply is complete with lead and 9V plug to fit into rear power connector (Optional). When the external power supply is connected, the internal batteries are then not used. The 230V power supply does not work as a battery charger.
  • DC Power Supplies: 4 x 1.5V AA Alkaline Batteries (approx 200h intermittent use). The battery compartments are on the rear of the CAL95.
  • Voltage Output Signal from BNC socket: +/- 2.000V for +/- 0… 199.9 Pa, +/- 2.000V for +/- 0…1999.9 Pa
  • Hysteresis/Repeatability: 0.1% Typical
  • Linearity (Accuracy): +/- 0.5% of Full Scale +/- 1 digit on positive range
  • Zero Drift: 0.05%/K (+10°C to +50°C)
  • Span Shift: < 0.02%/k (+10°C to +50°C)
  • Response Time: Transducer response time to changing pressure 0.3s
  • Display: Liquid Crystal display 3 1/2 digit for +/- 199.9 Pa and 4 1/2 digit for +/- 1999.9 Pa with Back Light
  • Operating Temperature: -10°C to +70°C
  • Operating Position: Vertical or Horizontal
  • Weight: Approx 3 kg
  • Air Tube Connections: Positive and Negative Pressure Barbed Nipple 6.5mm O/D x 15mm long
  • Purge Valves: A purge valve is fitted to both positive and negative ports to drain pressure
  • Enclosure: Sheet Metal coated black and aluminum front and rear plates complete with silk screen legends
  • Conformity: EN61326-1 EMC EN61010-1 SAFETY
  • Calibration Certificate: Supplied with Certificate that is traceable to any National Standards